Get In Touch

Konica Automation, a part of Konica International established in 1993, stands at the forefront of industrial automation solutions. 

Contacts
Location
India – Mumbai
3rd Floor, Pravasi Industrial Estate, Co-op Society Limited, Gala No. C/51, Vishweshwar Nagar, Off Aarey Road Goregaon East, Mumbai – 400097

Simple and compact inverter VF-nC3

Simple and compact inverter VF-nC3

This series offers the most compact model among the Toshiba inverter series inverters.
It can be used as easily as a power distributor and helps you apply an inverter to control a small-size machine.

Category:

About Simple and compact inverter VF-nC3

Developed on the concepts of “easier operation,” “easier installation” and “easier settings,” this inverter can be used for living-related equipment such as food processing machines, transport machines, fans and pumps. Input voltage class/applicable motor capacity ・ Single-phase 100 V input: 0.1 to 0.75 kW ・ Single-phase 200 V input: 0.1 to 2.2 kW ・ Three-phase 200 V input: 0.1 to 3.7 kW

Features

Easy operation

・The large setting dial in the center of the panel allows easy operation.
・To set a parameter, turn the setting dial and push its middle part to select the setting.
・The setting dial can also be used as a frequency setting knob.

Easy installation

・Like the power distributor, this inverter has a vertically oriented main circuit terminal block, which makes wiring arrangement easy and keeps the wiring space in order.
・Multiple units can be installed side by side, saving the space inside the control panel.
・The main circuit terminal block cover can be removed with a wiring screwdriver as well. This ensures easy wiring work and safety.

Easy settings

・Only the frequently used parameters are shown (easy mode).
Using the EASY key, you can toggle between two modes.
[Easy mode]: Only the eight most frequently used parameters are shown. Up to 24 parameters can be registered.
[Standard mode]: All the parameters can be shown.

Adopts

Built in the equipment, saving the space inside the control panel.

Like the power distributor, this inverter has a vertically oriented main circuit terminal block, which makes wiring arrangement easy and keeps the wiring space in order.
Also, multiple units can be installed side by side, saving the space inside the control panel.

The input of single-phase 100 V and single-phase 200 V is supported.

A power supply of single-phase 100 V or single-phase 200 V can be used.
・Single-phase 100 V input: 0.1 to 0.75 kW
・Single-phase 200 V input: 0.1 to 2.2 kW
* The applicable motor is a three-phase 200 V motor. Variable-speed operation can be performed by replacing the single-phase motor with a three-phase motor.

Safety function

You can set the function to prohibit parameters from being changed. Protection with a four-digit password is available for enhanced security.
The inverter also features a function that stores all customer-defined settings at once and resets changed values to those settings.

Eco-friendly design

The inverter is compliant with the RoHS Directive (Directive on the Restriction of the Use of Certain Hazardous Substances in Electrical Equipment).
Also, the single-phase 200 V models have a built-in EMC noise filter as a standard feature. The filter significantly reduces the harmonic noise generated by the inverter, achieving compliance with the EU EMC Directive.

Performance

Superb motor control

Select the motor control mode that matches the load characteristic of the equipment to bring out the best equipment performance.
・To change the rotation speed
Operate the inverter in the default “V/f constant mode.”
・When the equipment requires high torque
Use sensor-less vector control, which enables stable high-torque operation from the start until the rated rotation speed is reached.

Auto energy-saving mode

The inverter supports the auto energy-saving mode for operating fans, pumps and other devices in an energy-saving manner. Also, a current appropriate for the load flows. (The motor constant needs to be set.)

A wide range of application conditions

The inverter supports comprehensive specifications, allowing it to be applied to a wide variety of equipment around the world.
① Logic switching for control circuit terminals
② Power supply voltage: Three-phase 200 V, single-phase 200 V and single-phase 100 V
③ Ambient temperature: 60°C
④ Altitude: 3000 m
⑤ Operating frequency: 0.1 to 400 Hz
⑥ Programmable I/O terminals

Simple and compact inverter VF-nC3 Spec

 

Input voltage classes and applicable motor capacity range
Single-phase 100 V input: 0.1 to 0.75 kW
Single-phase 200 V input: 0.1 to 2.2 kW
Three-phase 200 V input: 0.1 to 3.7 kW
Overload capacity: 150% for 1 minute

Reviews

There are no reviews yet.

Be the first to review “Simple and compact inverter VF-nC3”

Your email address will not be published. Required fields are marked *